|
|
|
|
ECOA SpaceSaver HTTSS Hydraulic Tilt Tables
|
|
|
|
ECOA HTTSS Series Scissor Tilt Tables are heavy-duty electrohydraulic tables with
capacities of 2,000 to 6,000 lbs., angles of tilt from 0 to 45 degrees with
platform sizes of 36" x 48" to 60" x 72".
The SpaceSaver tilts within its own base frame, allowing the tilt operation to work within
a minimum of floor area for maximum efficiency. The hydraulic system is powered up
and down utilizing double acting cylinders. The leg rollers are entrapped within the base frame
to ensure maximum stability. Because they are autonomous products, HTTSS Series
Hydraulic SpaceSaver Tilt Tables can be either mounted on scissor lifts or used as free-standing tilt
tables.
|
Click on image for larger picture
|
|
Features of The HTTSS Series
|
- Internally-mounted .75 HP, 115/230V, 1PH, 60Hz, or 208/230/460V, 3PH, 60Hz
intermittent duty TENV super torque motor. Specify voltage required. If 115V, 1PH, 60Hz
voltage is required, a 20 amp circuit is necessary.
- 24V operating control voltage
- 24 V operating control voltage
- NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN"
Pushbutton box with 8 ft. straight cord
- NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical
connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
- 10 ft. power cord (connector plug not included)
- 12 in. high lip on pivot end
|
- Double-acting hydraulic cylinders
- Smooth steel tops with 3.75 in. straight safety toeguards with black and yellow safety stripes on
toeguards
- Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
- Surfaces degreased, oxide primed and finished with two coats of enamel
- Lifetime self-lubricating, antifriction bearings at all pivot points
- Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control
valve, solenoid valve, suction and return filters
- Includes hydraulic oil
|
|
|
SpaceSaver HTTSS Specifications
|
|
45° Tilt
|
|
Model
|
Capacity
(Pounds)
|
Platform Size
|
Base
Frame
|
Up Speed
(Seconds)
|
Ship
Weight
|
Quote Form
|
|
STD
|
MAX
|
|
HTTSS-02-45-36
|
2,000
|
36" x 48"
|
47" x 60"
|
22.5" x 48"
|
15 sec.
|
700 lbs.
|
Quote
|
|
HTTSS-02-45-48
|
2,000
|
48" x 48"
|
60" x 72"
|
34.5" x 48"
|
15 sec.
|
750 lbs.
|
Quote
|
|
HTTSS-04-45-36
|
4,000
|
36" x 48"
|
47" x 60"
|
22.5" x 48"
|
15 sec.
|
725 lbs.
|
Quote
|
|
HTTSS-04-45-48
|
4,000
|
48" x 48"
|
60" x 72"
|
34.5" x 48"
|
15 sec.
|
775 lbs.
|
Quote
|
|
HTTSS-06-45-36
|
6,000
|
36" x 48"
|
47" x 60"
|
22.5" x 48"
|
20 sec.
|
775 lbs.
|
Quote
|
|
HTTSS-06-45-48
|
6,000
|
48" x 48"
|
60" x 72"
|
34.5" x 48"
|
20 sec.
|
800 lbs.
|
Quote
|
The above models have the following in common:
- Angle of Tilt: 45°
- Lowered Height: 10"
|
- Cylinders (qty.): 1
- Motor: .75HP
|
|
|
The standard unit comes equipped with smooth top deck, straight toeguards and 12 lip.
The standard .75HP Power Units are internal and power supply 115/230V, 1PH, 60Hz. Specify voltage
required. If 115V, 1PH, 60Hz. voltage is required, a 20 amp circuit is necessary. Units are powered
up and down with double acting cylinders. The leg rollers are entrapped within the base frame to
ensure maximum unit stability. The SpaceSaver tilts within its own base frame, allowing the tilt
operation to work in a minimum floor area for maximum efficiency.
|
|
|
|
