Autoquip Series 35 Tilt Tables

Request STE Quote

Autoquip Upender

Autoquip offers tilt only or lift & tilt tables from our most popular standard Series 35 product line. Designed with solid steel structural members to stiffen the base frame and platform assemblies, adding rigidity and reducing deflection. Double acting hydraulic cylinders tilt product weighing up to 6,000 lbs. a full 90 degrees. Tilter speed is also controlled during raising or lowering.

Limit Switch

Limit Switch

Limit switch, and mechanical stops, in both directions prevents overuse of the motor, extending its life cycle.

Reinforced Deck

Reinforced Deck

Steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends its life.


STE-30-0252,500 lbs30°44" x 44"50" x 50"8"500 lbsQuote
STE-45-0252,500 lbs45°44" x 44"50" x 50"8"525 lbsQuote
STE-30-0404,000 lbs30°44" x 44"50" x 50"8"525 lbsQuote
STE-45-0404,000 lbs45°44" x 44"50" x 50"8"550 lbsQuote
STE-30-0606,000 lbs30°44" x 44"50" x 50"8"550 lbsQuote
STE-45-0606,000 lbs45°44" x 44"50" x 50"8"575 lbsQuote
STE-90-0808,000 lbs90°36" x 38"66" x 54"9"875 lbsQuote
Capacity2.5K lbs4K lbs
Min Top44" x 44"
Max Top50" x 50"
Weight500 lbs525 lbs525 lbs550 lbs

Capacity6K lbs8K lbs
Min Top44" x 44"36" x 38"
Max Top50" x 50"66" x 54"
Weight550 lbs575 lbs875 lbs


  • Tilters keep work within the ergonomic “power zone” and reduce fatigue and back injury by minimizing reaching and bending while loading and unloading bins and baskets.
  • Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
  • Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.
  • Standard controls are prewired and drive unit is already onboard. Installation only requires the tilter to be lagged to the ground and connected to electricity.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound in the industry.
  • Chrome-plated rods improve durability extend the life of cylinders and seals.
  • Exceptionally low lowered height allows greater on and off load flexibility.
  • Maintenance-free bearings at pivot points require no lubrication.
  • On-board maintenance devices enable maintenance crews to safely and effectively block open the tilter during inspection and routine maintenance.
  • Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
  • Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
  • Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
  • Steel support in upper and lower frames provide additional structural rigidity and resistance to twisting and bending of the tilter under load.


  • "V" Craddle
  • Remote Power Units
  • Electric Toeguards
  • Foot Operated Control
  • Accordion Skirting
  • Conveyor Tops
  • Ball Transfer Tops
  • Limit Switches
Copyright 2022
All Right Reserved
Solution Dynamics, Inc.
T: 877-860-3620
P: 262-521-5730
F: 262-521-5733
GSA Logo
MHI Member
MHEDA Member
Solution Dynamics, Inc BBB Business Review